![]() Sculpt the bear’s muzzle by carefully trimming the fur pile.Afterward, comb the fur along the seams in different directions to reduce their visibility.ĭo not stuff the body yet. Use either a needle or an awl to release the fur from the seams. Proceed to stuff the limbs, inserting the disk with the washer and cotter pin, and then sew up the opening. Securely sew up the head’s opening with waxed thread, ensuring to fasten and conceal the thread ends within the head. Fill the head with synthetic stuffing, and insert the disk with the washer and a cotter pin. Step 3: StuffingĬreate the final pieces by using pliers and a wooden stick with a rounded tip. Stitch the back of the head according to the marks A1-Dįor a clearer understanding of stitching the fabric components together, please refer to the following information.Stitch the sides of the head to the muzzle according to the marks A-A1 to C-C1.Stitch the two mirror parts of the muzzle according to the marks from A to B.Stitch the darts, highlighted in green.Carefully cut out the pattern pieces from the supplied template, leaving a margin of 7-10 mm at the edges. Start by arranging the pattern pieces so that the arrows match the direction of the fur. Whether you’re a seasoned crafter or a beginner, this guide is tailored for you. Let’s delve into what this guide has to offer. Self-hardening polymer clay or baked clay.Any materials you use for tinting fabric (oil paints, pastels, textile paints, markers, etc.) and paintbrushes.T-shaped cotter pins 2.5×28 – 5 pieces. ![]() A piece of fabric for the paws and inner parts of the ears.Metal pellets or glass pellets for weight.A pair of transparent glass eyes with a black pupil on a metal loop 20 mm in diameter.Strong threads and a needle for hand sewing.Thick faux fur with a pile length of 2 cm approx.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |